All cameras fire at once
The signal from the input port goes to the link and 6 output sockets. Multiple TriggerBoxes can be connected together to allow for the triggering of more than 6 cameras to create larger multi camera setups. All Trigger mode triggers all the cameras at the same time. Settings previously applied or saved to memory will not apply. All Trigger can only be controlled via a wired/wireless remote shutter release.
Tip: Connecting the TriggerBox see this article.
Connecting the unit :
1. Ensure all TriggerBoxes have power and the mode switches are green.
2. Plug a wired remote shutter release into the input socket of the first TriggerBox in your chain.
3. Connect each camera to a single output socket of the TriggerBox via a 3.5mm adaptor cable (these cables can be purchased from our shop) - all will fire simultaneously when the wired remote release is pressed.
4. Multiple TriggerBoxes are linked by connecting a 3.5mm stereo cable to the link socket of the first trigger box and then to the input of the next unit and repeating down the line (these can be purchased from our shop).