The PowerBox allows you to power the TriggerBox. Follow these steps to get your TriggerBox powered using the PowerBox and not have to worry about more wall outlets to power your TriggerBoxes. 


  • By the end of step 3: You'll have power running to your TriggerBox from the PowerBox


What do you need:

  • USB-C to USB-C cable


The 3 steps to setup

  1. Connecting the USB cable to the PowerBox
  2. Connecting the USB cable to the TriggerBox 
  3. Powering up the PowerBox

Step 1. Connecting the USB cable to the PowerBox

Connect one end of the USB-C cable into the USB-C port on the front of the PowerBox. Ensure the cable is completely plugged in.  (fig.1 a) 

Figure 1. Esper PowerBox Front Panel

Step 2. Connecting the USB cable to the TriggerBox

Connect the other end of the USB-C cable into the USB port on the front of the TriggerBox. Ensure the cable is completely plugged in.  (fig.2 a)

Figure 2. Esper TriggerBox Front Panel

Step 3. Power up the PowerBox

Power up the PowerBox using the provided power supply. The reset button will have a green light lit if it is receiving power. After a few seconds the TriggerBoxes mode button should start flashing and power up. If you are unsure how to power up the PowerBox please read our Getting Started: 3 Steps to setup Guide.

Figure 3. Esper PowerBox powering the TriggerBox in 'All Trigger (Green Mode)'

Figure 4. Esper PowerBox powering the TriggerBox in 'Smart Trigger (Blue Mode)'

Using short USB-C cables are ideal as this keeps your setup looking tidy and professional. We can supply USB-C to USB-C cables in short lengths. Click here to view our USB-C cable range.